GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
78
:SYSTem:COMMunicate:RLSTate
Set
Query
Description
Enables or disables local/remote state of the
instrument.
Syntax
Query Syntax
:SYSTem:COMMunicate:RLSTate
{LOCal|REMote|RWLock}
:SYSTem:COMMunicate:RLSTate?
Parameter/Return
parameter
LOCal
All keys are valid. This instrument is
controlled by the front panel controls.
REMote
All keys are invalid, except for the [local] key
and the ability to turn the output off.
RWLock
All keys are invalid. The instrument can only
be controlled remotely.
Example
:SYST:COMM:RLST LOCAL
Sets the operating mode to local.
:SYSTem:COMMunicate:SERial[:RECeive]
:TRANsmit:BAUD
Set
Query
Description
Sets or queries the UART baud rate.
Note:
The setting will only be valid after the power has
been cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:BAUD <NR1>
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:BAUD?
Parameter/Return
<NR1>
1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200
Example
SYST:COMM:SER:TRAN:BAUD?
>2400
Returns the baud rate settings.

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English