GW Instek APS-7000 Series - Status:warning:condition; Status:warning:enable; Status:warning[:Event]

APS-7000 Programming Manual
72
Summary: The Questionable Status Enable
registers, the Operation Status Enable registers and
Warning Status registers are both reset to 0.
The Questionable Status, Operation Status and
Warning Positive Transition filters are all set high
(0x7FFF) and the Negative Transition filters are all
set low (0x0000). I.e., only positive transitions will
be recognized for the Questionable Status,
Operation Status and Warning Status registers.
Syntax
:STATus:PRESet
:STATus:WARNing:CONDition
Query
Description
Queries the Warning Status register. This query
will not clear the register.
Syntax
:STATus:WARNing:CONDition?
Return
<NR1>
Returns the bit sum of the Warning Condition
register. (0~32767)
:STATus:WARNing:ENABle
Set
Query
Description
Sets or queries the bit sum of the Warning Status
Enable register.
Syntax
Query Syntax
:STATus:WARNing:ENABle <NR1>
:STATus:WARNing:ENABle?
Parameter
<NR1>
0~32767
Return parameter
<NR1>
0~32767
:STATus:WARNing[:EVENt]
Query
Description
Queries the Warning Status Event register and
clears the contents of the register.
Syntax
:STATus:WARNing[:EVENt]?
Return
<NR1>
Returns the bit sum of the Warning Status
Event register.