GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
120
parameter
MINimum
0
MAXimum
359
Example
:SIM:NORM1:PHAS:STOP 0
Sets OFF Phs to 0.
[:SOURce]:SIMulation:NORMal<1|2>:TIME
Set
Query
Description
Sets or queries the Time parameter of the normal1
or normal2 step for the Simulation mode.
Syntax
[:SOURce]:SIMulation:NORMal<1|2>:TIME
{<NR2>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:NORMal<1|2>:TIME?
[MINimum|MAXimum]
Parameter/Return
parameter
<1|2>
Normal 1 or Normal 2
<NR2>
Time of the step in seconds
MINimum
0
MAXimum
99.99s
Example
:SIM:NORM1:TIME 1
Sets the step time to 1 second.
[:SOURce]:SIMulation:NORMal<1|2>
:VOLTage
Set
Query
Description
Sets or queries the Vset parameter of the normal1
or normal2 step for the Simulation mode.
Syntax
[:SOURce]:SIMulation:NORMal<1|2>:VOLTage
{<NR2>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:NORMal<1|2>:VOLTage?
[MINimum|MAXimum]
Parameter/Return
parameter
<1|2>
Normal 1 or Normal 2
<NR2>
Voltage of the abnormal step.
MINimum
Minimum settable voltage
MAXimum
Maximum settable voltage
Example
:SIM:NORM1:VOLT MAX
Sets the normal1step voltage to the maximum.

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English