GW Instek APS-7000 Series Programming Manual

APS-7000 Programming Manual
40
9
10
11. Click the Configuration Icon. Under the IO
Settings tab check Enable Termination Character.
The termination character should be set as Line
Feed -\n.
11
12. Click the Input/Output icon. Under the Basic I/O
tab, make sure *IDN?\n is entered in the Select
or Enter Command drop box.
13. Click Query.
The APS-7000 will return the machine
identification string into the buffer area:
GWINSTEK,APS-7050, GEXXXXXXX,
XX.XX.XXXXXXXX

GW Instek APS-7000 Series Specifications

General

Brand	GW Instek
Model	APS-7000 Series
Category	AC Power Distribution
Language	English