●
Self Timer
The camera will wait a pre-set time to make the
exposure after the Shutter Release Button is pressed.
Time:
Delay between Shutter Release and exposure.
LED Blink:
Controls if the front LED shall be used to
indicate Self Timer operation.
When Finished:
Determines if the function shall be
active after a completed cycle or not. If set to
Exit
, the
Self Timer is disabled after the exposure.
●
Interval
The camera will make a pre-determined number of
exposures with a pre-set interval time.
Time:
The time between exposures.
Frames:
How many exposures will be made.
Initial Delay:
Delay between Shutter Release and rst
exposure.
●
Exposure Bracketing
The camera will automatically make a pre-determined
number of exposures with a pre-set exposure adjust-
ment difference between each frame.
Amount:
How much exposure difference between
each exposure.
Frames:
The number of exposures in the sequence.
Initial Delay: Delay between Shutter Release and rst
exposure.
Param in M:
Which of Aperture or Shutter Speed to
change if Exposure bracketing is used in Manual mode.
When Finished:
Determines if the function shall be
active after a completed cycle or not.
For
Self Timer
,
Interval
and
Exposure Bracketing
the left
part of the panel displays the current setting. If no changes
are required, tap the function icon again to make it active.
To change any of the parameters, tap the right part of the
screen (A). This will bring up the dedicated settings for the
function.
Continued on the next page.
Self Timer
Exposure Bracketing
Interval
A
X1D II 50C USER GUIDE www.hasselblad.com
54
FUNCTIONS
Contents
To Next Page
Loading...
Need help?
General
Weight and Dimensions
