HBM QuantumX - Page 177

Accessories
QuantumX A03031_24_E00_01 HBM: public 177
IEEE1394b FireWire
Description Order no.
IEEE1394b FireWire
cable (module-to-
module)
FireWire connection cable between
(lengths: 0.2m/2 m/5 m). Fitted on both
ends with appropriate plugs.
Note: You have the option to use the cable
to supply the modules with voltage (max.
1.5 A, from source to last acceptor).
1-KAB272-W-0.2
1-KAB272-2
1-KAB272-5
Ethernet
Ethernet Ethernet crossover cable, 2 m; CAT5e 1-KAB239-2
Transducer side
General information
Article Description Order no.
D-Sub-HD 15‐pin plug
set with TEDS chip
Plug kit D-Sub HD 15-pin (male) with
TEDS chip DS24B33f. Housing: metal
lized plastic with knurled screws.
Note: the TEDS chip is blank.
1-SUBHD15-
MALE
D-Sub-HD 15‐pin port
saver
Four fully wired port savers protect
D-Sub-HD 15-pin ports against wear and
tear due to frequent plugging and unplug
ging of transducers. Extends durability by
at least 500 contact cycles.
Construction: plug in socket with screw
connection.
1-SUBHD15-
SAVE
DSubHD 15‐pin
300 V CAT II adapter
Voltage signal conditioner 300 V (CAT II),
TEDS, D‐SUB-HD device connection,
insulated lab measuring lead (length
0.5 m).
1-SCM-HV