HBM QuantumX - Page 60

Connecting individual QuantumX modules
60 A03031_24_E00_01 HBM: public QuantumX
allows notebooks in particular to be quickly and automatically integrated
without reconfiguration into the company network (DHCP). But direct oper
ation between the notebook and the modules (peer2peer) is also very
quick, using automatic addressing (APIPA).
S The Ethernet network adapter of the PC or modules can also be manually
configured with a specific IP address and subnet mask, of course.
The following must be noted for direct IPoverFireWire via FireWire connec
tion:
S FireWire adapter addressing (e.g. expressCard/34 or PCIexpress) at the
PC or data logger end uses a previously installed Windows device driver
from HBM, and cannot be modified. The modules are automatically
addressed (plugandplay and USB), and are available immediately.