About this Manual
HEIDENHAIN iTNC 530 5
About this Manual
The symbols used in this manual are described below.
Would you like any changes, or have you found
any errors?
We are continuously striving to improve documentation for you.
Please help us by sending your requests to the following e-mail
address: tnc-userdoc@heidenhain.de.
This symbol indicates that important notes about the
function described must be adhered to.
This symbol indicates that there is one or more of the
following risks when using the described function:
Danger to workpiece
Danger to fixtures
Danger to tool
Danger to machine
Danger to operator
This symbol indicates that the described function must be
adapted by the machine tool builder. The function
described may therefore vary depending on the machine.
This symbol indicates that you can find detailed
information about a function in another manual.
To Next Page
Loading...
