HEIDENHAIN ITNC 530 - CONVERSATIONAL PROGRAMMING User Manual

HEIDENHAIN iTNC 530 169
5.1 Entering Tool-Related Data
Spindle speed S
The spindle speed S is entered in revolutions per minute (rpm) in a
TOOL CALL block. Instead, you can also define the cutting speed Vc in
m/min.
Programmed change
In the part program, you can change the spindle speed in a TOOL CALL
block by entering the spindle speed only:
U To program a tool call, press the TOOL CALL key.
U Ignore the dialog question for Tool number ? with the
NO ENT key.
U Ignore the dialog question for Working spindle axis
X/Y/Z ? with the NO ENT key.
U Enter the new spindle speed for the dialog question
Spindle speed S= ?, and confirm with END, or switch
via the VC soft key to entry of the cutting speed.
Changing during program run
You can adjust the spindle speed during program run with the spindle-
speed override knob S.

HEIDENHAIN ITNC 530 - CONVERSATIONAL PROGRAMMING Specifications

General

Brand	HEIDENHAIN
Model	ITNC 530 - CONVERSATIONAL PROGRAMMING
Category	Control Unit
Language	English