HID HDP5000 - Using the LRC Generation Dropdown List

All rights reserved HID Global Corporation
HDP5000 High Definition Card Printer/Encoder User Guide L000950 Rev 1.8
125
Using the LRC Generation dropdown list
Use this option to customize the LRC Generation Mode (used to encode the magnetic data
on the currently selected track).
Step Procedure
1
• Select No LRC to change the LRC Generation to none.
OR
• Select Even Parity to change the LRC Generation to Even Parity. (Note:
This is the default for all tracks.)
OR
• Select Odd Parity to change the LRC Generation to Odd Parity.