EasyManuals Logo

HID HDP5000 User Manual

HID HDP5000
373 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
All rights reserved HID Global Corporation
HDP5000 High Definition Card Printer/Encoder User Guide L000950 Rev 1.8
35
Printer Components: Card Input and Output Hoppers
Type Description
Card Cartridge The Card Cartridge will hold a maximum of 100 cards (based on a
standard 30 mil card thickness).
Printer Components: Card Output Hopper and Reject
Hopper
Type Description
Card Output
Hopper
HDP5000/HDP5000-LC:
All standard HDP Card Printers provide a 200 card capacity Card
Output Hopper (based on a standard 30 mil card thickness). (Note:
This Hopper stores the cards after they are printed.) Shown in the
lower left.
Reject hopper functionality when connected to the Flipper Module.
The storage is available on the output tray or the Lamination
Module.
Reject Hopper Shown in the upper left of the image below.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HID HDP5000 and is the answer not in the manual?

HID HDP5000 Specifications

General IconGeneral
Print Resolution300 dpi
InterfaceUSB
Print TechnologyDye sublimation
Card Capacity100-card input hopper
ConnectivityUSB 2.0
Print CapabilitySingle-sided
Operating System SupportWindows 7, 8, 10
Card SizesCR80 (standard credit card size)

Related product manuals