HID HDP5000 User Manual

All rights reserved HID Global Corporation
HDP5000 High Definition Card Printer/Encoder User Guide L000950 Rev 1.8
324
Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using
the Application
Step Procedure
8 Set the ribbon for YMCFK in the Printing Preferences. (Note: The Auto
Detect button may also be used.)
9 Check Dual Pass if you would like to print the F panel on a separate panel of
HDP film from the YMC image. (Note: It is recommended that the user use
the default “Dual Pass” option if the fluorescent image is used in places where
other dye is used or any time the “Invert F panel Image” option is selected)
10 Check Invert F-Panel Image to create a negative of the fluorescent image.
(Note: This may improve the look of the person’s image if used for the Logo.)
Display C:
BMP Image located at c:\globe.bmp

HID HDP5000 Specifications

General

Print Resolution	300 dpi
Interface	USB
Print Technology	Dye sublimation
Card Capacity	100-card input hopper
Connectivity	USB 2.0
Print Capability	Single-sided
Operating System Support	Windows 7, 8, 10
Card Sizes	CR80 (standard credit card size)