HID HDP5000 - Page 352

All rights reserved HID Global Corporation
HDP5000 High Definition Card Printer/Encoder User Guide L000950 Rev 1.8
352
Section 18: Glossary of Terms
Term Definition
Coercivity The property of a Magnetic Stripe that indicates the amount of
force needed before magnetic saturation, measured in Oersted
(Oe).
Color matching The process of adjusting color hue, saturation and brightness, to
duplicate a desired color. An algorithm within the Driver, which
adjusts the color balance and provides output with the desired
color, automates this process.
Compressed air Air stored in a tank or produced by an aerosol can, delivered by
through nozzle at a high speed. Used in the Printer to blow out
debris.
Contrast The degree of difference in luminance of two areas.
Control panel The panel on the Printer from which the User can control Printer
functions. The Printer is usually composed of the control buttons
and an LED or LCD display.
CR-79 A card dimension standard of 2.0625 L X 3.3125 W (+/-0.002 W,
+/-0.005 L) or 52.400 X 84.150 mm.
CR-80 A card dimension standard of 2.125 X 3.370 (+/-0.002 W, +/-
0.005 L) or 53.975 X 85.598 mm.
CR-90 A card dimension standard of 2.375 X 3.625 (+/-0.002 W, +/-
0.005 L) or 60.325 X 92.075 mm.
CR-100 A card dimension standard of 2.625 X 3.875 (+/-0.002 W, +/-
0.005 L) or 66.675 X 98.425 mm.