HID HDP5000 User Manual

All rights reserved HID Global Corporation
HDP5000 High Definition Card Printer/Encoder User Guide L000950 Rev 1.8
71
Selecting the Card Type
Step Procedure
2 If using a card stock other than listed, use the Custom 1options to save
custom Dwell Time and dwell temperature controls on the Image Transfer
tab.
a. Click on the Custom options and enter a name for the card stock.
b. Click on the Image Transfer tab to adjust the Dwell Time and
temperature sliders to the appropriate settings. See the next page. (Note:
These settings will be saved for the custom card type when the Printer
Driver setup window is closed.)
c. Custom Card stock: To determine the proper settings for custom card
stock, apply the Tape adhesion Test. Conducting the Tape Adhesion
Test

HID HDP5000 Specifications

General

Print Resolution	300 dpi
Interface	USB
Print Technology	Dye sublimation
Card Capacity	100-card input hopper
Connectivity	USB 2.0
Print Capability	Single-sided
Operating System Support	Windows 7, 8, 10
Card Sizes	CR80 (standard credit card size)