ID2000 Series Industrial Code Reader User Manual
97
SmartSDK
●
NoRead Image Index: It sets the specific image that is outputted when no code
information is read. For example, if you set this parameter as 5, and the 5th image will be
output.
●
One By One Enable: If it is enabled, the device will send one piece of code information
each time in accordance with the specified interval. You can set the interval via One By
One Interval and the default value 100 ms.
FTP
When the communication protocol is FTP, set the following parameters of data processing:
●
NoRead Image Index: It sets the specific image that is outputted when no code
information is read. For example, if you set this parameter as 5, and the 5th image will be
output.
●
One By One Enable: If it is enabled, the device will send one piece of code information
each time in accordance with the specified interval. You can set the interval via One By
One Interval and the default value 100 ms.
●
Local Save Picture Mode: It includes Off, NoRead, and Insufficient Code. You can select
NoRead to let the device save images when no code is read.
●
Local Picture Type: Specify the type of pictures saved locally. You can select JPEG or
BMP.
●
Output Retrans Enable: Enable to allow data re-transmission. Specify the limit of re-
transmission attempts in Output Retrans Number.
●
FTP Picture Name Format: Click to select one or multiple items to be contained in
the picture name. The selected items will be displayed in the frame. You can also enter
more contents directly in the frame.
●
FTP Transmission Conditions: Set the condition to upload the data outputted by the
device to FTP server.
○
All: Always upload the data.
○
ReadBarcode: Upload the data only when the barcode is read by the device.
○
NoReadBarcode: Upload the data only when no barcode is read by the device.
●
FTP Transmission Result Contain: Select contents to upload to the FTP server.
○
JustResult: Only upload the content of the barcode.
○
JustPicture: Only upload the barcode image.
○
ResultAndPicture: Upload both the content of the barcode and the barcode image.
●
FTP Time Format: Select a format type from the drop-down list for the time stamp
contained in the file name.
Note
Take YYYYMMDD_HHMMSSFFF as an example, (from the left to the right) YYYY
represents year, MM month, DD date, HH hour, MM minute, SS second, FFF millisecond.
TCP Client / Serial / TCP Server / Profinet / MELSEC / EthernetIp / Modbus /
To Next Page
Loading...
