HikRobot ID2000 Series - Basic Operation

ID2000 Series Industrial Code Reader User Manual
45
No.
Name
Description
3
Device
Configuration
Wizard Panel
The wizard for device configurations. In the Device Information
field, you can view information about a device and its
corresponding network interface. You can connect device(s) to
the Software, manage devices by groups, and configure
parameters related to image settings, algorithm settings, I/O
control settings, communication settings, data processing,
and configuration management.
4
Live View Window
Displays the live video of the selected device(s).
5
History Panel
Displays the code reading history of device(s). You can also
view the real-time reading results during acquisition.
The device configuration wizard panel and control toolbar help you perform some basic
operations of the device.
Table 8-2 Device Configuration Wizard Panel Description
No.
Module Name
Description
1
Device Connection
You can connect or disconnect device, modify device IP
address, view device information, etc.
2
Image Settings
You can set image parameters, light parameters, etc.
3
Algorithm Settings
You can add different code type, set code number, etc.
4
I/O Control Settings
You can set parameters related with input and output.
5
Communication Settings
You can select different communication protocols, and
set parameters for output result.
6
Data Processing
You can set filter rule for output result.
7
Configuration
Management
You can save and load user parameters, and restart the
device.
8.2 Basic Operation
Steps
1. Go to the left corner of live view window, and select the operation mode.