HikRobot ID2000 Series - Why There Is no Image in the Live View

ID2000 Series Industrial Code Reader User Manual
128
Reason
Network circuitry speed is not 100 Mbps.
Solution
Check whether the network transit speed is 100 Mbps or not.
12.4 Why there is no image in the live view?
Problem
No image in the live view.
Reason
● Enabled trigger mode, but there is no trigger signal.
● Network circuitry speed is not 100 Mbps.
Solution
● Sent the trigger signal to the device, or disable the trigger mode.
Check whether the network circuitry speed is 100 Mbps or not.