ID2000 Series Industrial Code Reader User Manual
96
3. After setting filter rule, enter the code in Code Check to check if the filter rule is successful.
Figure 9-46 Code Check
Note
If the filter rule you configured is correct, the result is valid. Otherwise, it is invalid.
4. (Optional) Click to delete unwanted filter rules.
5. (Optional) Click Export to export configured filter rules to local PC.
Note
The filter rule parameters of the regular expression may differ by device models and
firmware versions.
9.9.2 Data Processing Settings
You can configure the contents contained in the output barcode information.
Note
●
The actual parameters displayed may vary with different communication protocols. For
details about communication settings, refer to Communication Settings.
●
The device with USB data interface supports SmartSDK and USB only, and device with
fast Ethernet supports all communication protocols apart from USB.
●
The specific parameters and parameter order may differ by the device’s operation mode,
trigger mode, device models and firmware versions.
To Next Page
Loading...
