ID2000 Series Industrial Code Reader User Manual
98
UDP / FINS/ USB
When the communication protocol is TCP Client / Serial / TCP Server / Profinet / MELSEC /
EthernetIp / Modbus / UDP / FINS/ USB, set the following parameters of data processing.
Note
Here we use “***” to represent the specific protocol name.
●
NoRead Image Index: It sets the specific image that is outputted when no code
information is read. For example, if you set this parameter as 5, and the 5th image will be
output.
●
One By One Enable: If it is enabled, the device will send one piece of code information
each time in accordance with the specified interval. You can set the interval via One By
One Interval and the default value 100 ms.
●
Local Save Picture Mode: It includes Off, NoRead, and Insufficient Code. You can select
NoRead to let the device save images when no code is read.
●
*** Output Format: Click to select one or multiple items to be contained in the picture
name. The selected items will be displayed in the frame. You can also enter more contents
directly in the frame.
●
*** Output Noread Enable: Enable this to set the default output content if no barcode is
read during transmission. Edit the output text in Output NoRead Text.
●
*** Output Start Text: The contents of the start part of the data outputted. You can set
the contents as desired.
●
*** Output Stop Text: The contents of the end part of the data outputted. You can set the
contents as desired.
●
*** Output Barcode Enter Character Enable: Whether to show input character in the data.
●
*** Output Barcode Newline Character Enable: Whether to show new-line character in the
data.
9.10 Set Multicast
The multicast function is used to let multiple devices have the same trigger number when
they are acquiring images and analyzing codes at the same time. When each device sends
the trigger number and outputted images to the code reading platform, the platform will
integrate the images with the same trigger number as the information of the same package.
The main principle of the multicast function is to set one main device among multiple
devices, and remaining devices are called sub devices. As the first triggered device, the main
device sends trigger numbers to sub devices each time, and sub devices replace their trigger
numbers with received ones so that all devices have the same trigger numbers.
Follow the steps below to set multicast function according to actual demands.
To Next Page
Loading...