HikRobot ID2000 Series - Set Image

ID2000 Series Industrial Code Reader User Manual
51
9.3.1 Set Image
You can set parameters like exposure time, gain, Gamma, acquisition frame rate, acquisition
burst frame count, etc. in Image Settings area.
Table 9-3 Set Image Parameters
Name
Description
Exposure Time
You can increase exposure time to improve image brightness.
Note
To some extent, increasing exposure time will reduce
acquisition frame rate, and impact image quality.
Gain
You can increase gain to improve image brightness.
Note
To some extent, increasing exposure time will reduce
acquisition frame rate, and affect image quality.
Gamma
Gamma allows you to adjust the image contrast. It is
recommended to reduce Gamma to increase brightness in dark
background.
Acquisition Frame Rate
Acquisition frame rate refers to the image number that is
acquired by the device per second.
Acquisition Burst Frame
Count
Acquisition burst frame count refers to the outputted image
number when the device is triggered once.
Polling Enable
It enables the polling function, you can select off, single or
multiple mode.
Note
The parameter of polling enable will be displayed only when the
trigger mode is on.
Figure 9-3 Set Image Parameters