ID2000 Series Industrial Code Reader User Manual
41
7.2 Set PC Environment
To ensure stable client running and data transmission, you are recommended to set PC
environment. For the device with fast Ethernet data interface, you need to turn off the firewall
and set PC network. For the device with USB data interface, you need to check the USB drive
on the PC.
7.2.1 Turn off Firewall for Network Device
Steps
Note
For different Windows versions, the path name or interface may differ. Please refer to
the actual condition.
1. Go to Windows Firewall.
●
Windows XP system: Click Start → Control Panel → Security Center → Windows
Firewall.
●
Windows 7 system: Click Start → Control Panel → Windows Firewall.
●
Windows 10 system: Click Start → Control Panel → System and Security → Windows
Defender Firewall.
2. Click Turn Windows Defender Firewall on or off on the left.
3. Select Turn off Windows Defender Firewall (not recommended).
Figure 7-2 Windows Defender Firewall
4. Click OK.
7.2.2 Set PC Network for Network Device
To ensure stable data transmission and normal communication between the PC and the
device via client software, you need to set the PC network and make sure that they are in the
same network segment.
To Next Page
Loading...
