ID2000 Series Industrial Code Reader User Manual
4
Chapter 2 Overview
2.1 Introduction
With functions of image acquisition, code recognition and output, the ID2000 series
industrial code reader can read different types of 1D codes and 2D codes. It adopts compact
design and is small in size. The device is applicable to consumer electronics, food and
medicine, automobile spare parts, electronics semiconductor, and other industries.
The device uses sensors and optical elements to obtain images of the measured object,
which is achieved via the built-in deep learning code reading algorithm. The device also
supports outputting the detection result via different communication modes.
2.2 Key Feature
●
Compact design and small in size.
●
Adopts code reading algorithm to read different types of 1D codes and 2D codes.
●
Provides good robustness to read codes with spots, defects and low contrast radio.
●
Adopts laser-aiming light to help aim codes.
●
Adopts buzzer and status indicator for prompting the device’s operation status.
●
Adopts multiple IO interfaces and plug-in power interface.
●
Supports multiple communication protocols, including TCP, Serial, FTP, Profinet, etc.
Note
●
The specific functions may differ by device models.
●
Refer to the device's specifications for specific parameters.
To Next Page
Loading...
