HikRobot ID2000 Series - Set Setting Codes of Data Processing

ID2000 Series Industrial Code Reader User Manual
114
Function
Setting Codes
Function
Setting Codes
Digital Code 8
Digital Code 9
10.6 Set Setting Codes of Data Processing
You can set the device’s outputted code results via scanning the specific setting codes as
shown below.
Steps
1. Read setting codes of enabling prefix or suffix.
Table 10-6 Setting Codes of Enabling Prefix or Suffix
Function
Setting Codes
Function
Setting Codes
Enable Prefix
Disable Prefix
Enable Suffix
Disable Suffix
2. Read setting codes of editing prefix or editing suffix.
Table 10-7 Setting Codes of Editing Prefix or Suffix
Function
Setting Codes
Function
Setting Codes
Edit Prefix
Edit Suffix