HikRobot ID2000 Series - Code Reading Mode Settings

ID2000 Series Industrial Code Reader User Manual
49
Table 9-1 Feature Tree Description
Name
Description
Device Control
It allows you to view the device’s information, edit its name, etc.
Read Setting
It allows you to set the device’s operation mode and select code
types.
Image Setting
It allows you to set frame rate, exposure, gain, Gamma, etc.
Algorithm Control
It allows you to algorithm parameters.
Focus Control
It allows you to set the device’s focus mode and related
parameters.
Self Adapt Control
It allows the device to automatically adjust exposure, gain, Gamma
and other parameters to have a better code reading effect.
Light Source Control
It allows you to set the light source’s parameters.
Line Mode Control
It allow you to customize the specific line as input or output
according to actual demands.
Trigger and IO Control
It allows you to set parameters of input and output.
Stop Trigger Control
It allows you to stop device trigger via TCP, UDP, I/O, serial port and
USB. You can also set code reading timeout duration or max. code
amount to be read to stop trigger.
Filter Rules
It allows you to set the filter rule of codes.
Communication
Control
It allows you to set parameters related to different communication
protocols.
Multi Camera Control
It allows you to set parameters of multi-camera to let them operate
in a collaborative way.
Result Setting Control
It allows you to set parameters of outputted contents.
Statistics Info.
It allows you to count data related with code reading.
User Set Control
It allows you to save and load configured user set.
Diagnose Event Report
It allows you to monitor memory and CPU usage rate, and let you
know when there is a crash, higher CPU usage rate, insufficient
memory, etc.
9.2 Code Reading Mode Settings
The device supports different code reading modes, including accurate mode and batch
mode.