ID2000 Series Industrial Code Reader User Manual
5
Chapter 3 Appearance
Note
Appearance here is for reference only. Refer to the device's specification for detailed
dimension information.
Refer to the table and figures below for the information and appearance of different device
models.
Table 3-1 Device Description
Figure 3-1, Type I Device
The device does not have a focus knob, but it supports
adjusting focus via its solid vari focal lens.
Figure 3-2, Type II Device
The device is a vari focal device that supports adjusting
focus manually via its focus knob. Its focal length is short.
Figure 3-3, Type III Device
The device is a vari focal device that supports adjusting
focus manually via its focus knob. Its focal length is long.
Figure 3-4, Type IV Device
The device has a c-mount lens mount.
Figure 3-5, Type V Device
The device is a fixed focal device whose focus cannot be
adjusted.
Figure 3-6, Type VI Device
The device is a fixed focal device whose focus cannot be
adjusted.
Figure 3-7, Type VII Device
The device is a fixed focal device whose focus cannot be
adjusted. It adopts compact design and is small in size.
To Next Page
Loading...
