HikRobot ID2000 Series - Opto-Isolated Output Circuit

ID2000 Series Industrial Code Reader User Manual
26
Table 6-1 Input Electrical Feature
Parameter Name
Symbol
Value
Input Logic Level Low
VL
1.5 VDC
Input Logic Level High
VH
2 VDC
Input Falling Delay
TDF
81.6 μs
Input Rising Delay
TDR
7 μs
6.1.2 Opto-isolated Output Circuit
Type V device's LineOut 0/1 are opto-isolated outputs, and internal circuit is as follows.
Note
● The output voltage ranges from 5 VDC to 30 VDC.
● The maximum output current is 25 mA.
● Do not directly connect with inductive load (e.g. DC motor, etc.) when outputting.
● If the external voltage and resistance change, the corresponding current of output signal
and output logic level low may differ.
Figure 6-3 Internal Circuit of Output Signal
Figure 6-4 Output Logic Level