HikRobot ID2000 Series - Chapter 12 FAQ (Frequently Asked Question); No Device Listed in IDMVS Client Software; Dark Image During Live View; Low Frame Rate or Image Tearing

ID2000 Series Industrial Code Reader User Manual
118
Table 10-12 Set Setting Codes of Buzzer
Function
Setting Codes
Function
Setting Codes
Enable Buzzer
When Reading
Codes
Disable Buzzer
When Reading
Codes
Set Buzzer
Duration 50 ms
When Reading
Codes
Set Buzzer
Duration 100
ms When
Reading Codes
Set Buzzer
Duration 150
ms When
Reading Codes
--
--
10.10 Set Setting Codes of USB Communication
The setting codes of USB communication can enable or disable the USB communication
function, set baud rate, etc.
Note
Only the USB type device supports the USB communication.
Table 10-13 Set Setting Codes of USB Communication
Function
Setting Codes
Function
Setting Codes
Enable USB
Communicati
on
Disable USB
Communication