ID2000 Series Industrial Code Reader User Manual
124
Chapter 11 Device Maintenance
11.1 Update Firmware
The device supports updating firmware via the client software.
Note
●
Disconnect the device with client software.
●
Please use the firmware package of the corresponding device model for upgrading.
●
Do not power off the device or disconnect network during upgrading.
●
The device will reboot automatically after updating the firmware.
Steps
1. Select the device to be updated in the device list, and right click the device.
2. Click Firmware Update.
3. Click to select update file from local PC, and click Update to update firmware.
Note
You can also go to Tool → Firmware Updater to update firmware.
Figure 11-1 Update Firmware
11.2 Set Time
After enabling NTP time synchronization, the device will synchronize time according to the
configured interval.
To Next Page
Loading...