HikRobot ID2000 Series - Chapter 11 Device Maintenance; Update Firmware; Set Time

ID2000 Series Industrial Code Reader User Manual
115
3. Set prefix and suffix characters according to actual demands, find the corresponding
hexadecimal code value in ASCII table (see Appendix A ASCII Table for details), and read
the corresponding digital codes. For example, if the defined prefix and suffix content is *,
the corresponding ASCII code is 2a. Use to the device to read the digital code 2 and digital
code a in turn.
Note
Up to ten setting codes can be read.
Table 10-8 Setting Codes of a to f
Function
Setting Codes
Function
Setting Codes
Digital Code a
Digital Code
b
Digital Code c
Digital Code
d
Digital Code e
Digital Code f
Table 10-9 Setting Codes of Data Processing
Function
Setting Codes
Function
Setting Codes
Enable Stop
Text
Disable Stop
Text