HikRobot ID2000 Series - Basic Operation

ID2000 Series Industrial Code Reader User Manual
36
None-isolated Input
USB Interface
NPN
Device
NPN Device Power
NPN Power Ground
Signal Line
VCC
GND of VCC
Type VII
Device
●
●
Figure 6-24 Input Signal Connecting to NPN Device (Type VII Device with USB Interface)
None-isolated Input
DB9 Serial Port
NPN
Device
NPN Device Power
NPN Power Ground
Signal Line
VCC
GND of VCC
Type VII
Device
●
●
Figure 6-25 Input Signal Connecting to NPN Device (Type VII Device with RS-232)
Switch
The switch can provide low electrical level to trigger the bi-directional I/O.
None-isolated
Input
DB9 Connector
> 3.3 V
0 V
Figure 6-26 Input Signal Connecting to Switch (Other Devices Apart from Type VII Device)
None-isolated Input
USB Interface/DB9 Serial Port
> 3.3 V
0 V
Type VII
Device
Figure 6-27 Input Signal Connecting to Switch (Type VII Device)