HikRobot ID2000 Series - Chapter 9 Device Settings; Feature Tree Introduction

ID2000 Series Industrial Code Reader User Manual
39
1
5
69
Figure 6-34 9-Pin Connector
Table 6-9 Pin Definitions
Pin No.
Name
Description
2
TX
Transmits Data
3
RX
Receives Data
4
PWR
Power Supply (12 VDC To 24 VDC)
5
GND
Signal Ground
Caution
In addition to the 4
th
pin, the serial port connector of the type VII device can also provides
supply power to the device via its own DC input head, supporting 12 VDC to 24 VDC input.
However, do not use the VCC pin of the OPEN line and the serial port connector to power
the device at the same time. Otherwise, damaging to power supply may occur.