ID2000 Series Industrial Code Reader User Manual
65
Draw Single Group of ROI
Steps
1. Go to Algorithm Settings, and find Algorithm ROI.
2. Click Draw in Draw ROI to draw ROI in the live view window.
Figure 9-18 Draw ROI
3. (Optional) Repeat the above step to draw multiple ROIs according to actual demands.
Note
The client software only parse codes in the ROI you drawn.
4. (Optional) Set other ROI parameters according to actual demands.
●
ROI Index: It indicates different ROIs and ranges from 0 to 149 corresponds 1 to 150 ROIs.
●
Algo Region Left X: It refers to the X coordinate of the upper left corner in algorithm ROI.
●
Algo Region Left Y: It refers to the Y coordinate of the upper left corner in algorithm ROI.
●
Algo Region Width: It refers to the width in algorithm ROI.
●
Algo Region Height: It refers to the height in algorithm ROI.
5. (Optional) Click Execute in Restore Max. Algorithm ROI to restore the ROI to the full screen.
6. (Optional) Click Execute in Clear All ROI to delete all ROIs.
Draw ROI via Chessboard
Steps
1. Go to Algorithm Settings, and find Algorithm ROI.
2. Click Execute in Chessboard ROI, set parameters, and click OK after setting.
To Next Page
Loading...
