ID2000 Series Industrial Code Reader User Manual
67
Set 1D Code
●
Timeout Value: Timeout value refers to the maximum running time of algorithm, and its
unit is ms. The code reader will stop parsing the images and return results if the time is
exceeded the waiting time configured.
●
Code Color: It defines the readable code color. White Code On Black Wall means that the
client software can recognize the white code with black background. Black Code On White
Wall means that the client software can recognize the black code with white background.
Adaptive means that the client software can recognize both the black code with white
background, and the white code with black background.
●
Code 39 Check: Enable this parameter if Code 39 uses the parity bit.
Note
You need to select Code 39 in Add Barcode.
●
ITF 25 Check: Enable this parameter if ITF 25 uses the parity bit.
Note
You need to select ITF 25 in Add Barcode.
●
1D Code Quality Enable: If it is enabled, the client software will judge the quality of 1D
code and output overall grade. Currently, this parameter is only applicable to Code 39 and
Code 128.
●
Code Score Enable: If it is enabled, the client software will evaluate the code reading
environment for 1D code and output code score.
Set 2D Code
●
Timeout Value: Timeout value refers to the maximum running time of algorithm, and its
unit is ms. The code reader will stop parsing the images and return results if the time is
exceeded the waiting time configured.
●
Algorithm Running Mode: It is used to be set the algorithm operating mode. It includes
High Speed, High Performance, and Balance. High Speed focuses on recognition speed,
and the algorithm can recognize the code rapidly, while High Performance refers to the
algorithm can recognize the code that has distortion, spot or white gap, but its recognition
speed is slow. Balance refers to the algorithm makes a balance between speed and
performance.
●
2D Code Max. Size: It refers to the max. recognizable code width. The 2D code will not be
recognized if its width exceeds the configured value.
●
Mirror Mode: It is useful when the recognized image is a mirror one, mirroring in X
coordinate. 3 modes are available: Adaptive, Mirror, and Non Mirror.
●
Downsampling Level: It refers to the pixel sample size that the code reader takes.
Increasing this parameter will improve the code reading efficiency at the expense of code
recognition rate.
To Next Page
Loading...
