Hioki PW3335 - Page 181

Appendix 4 Rack Mounting
A
7
Installation procedure
1
Remove the feet from the bottom of the instrument, and the screws from the sides (four near
the front).
2
1 instrument
Installing the spacers on both sides of the instrument, affix the rack mounting plate (for
mounting 1 instrument) with the M4 × 10 mm screws (4 locations).
M4 × 6 mm
M3 × 6 mm
M4 × 8 mm (4 locations)
Spacers
Rack mounting plate (EIA,
for mounting 1 instrument)
M4 × 8 mm (4 locations)
Spacers
Rack mounting plate (JIS,
for mounting 1 instrument)
EIA JIS