3.4 Viewing Harmonic Measured Values
75
Harmonic voltage content percentage (HRM V %), harmonic current content percentage (HRM A %),
harmonic active power content percentage (HRM W %)
Harmonic voltage phase angle, harmonic current phase angle, harmonic voltage/current phase difference
These parameters cannot be displayed using keys on the instrument. They can only be downloaded using
communications functionality. (See the Communications Command Instruction Manual.)
Parameters displayed as harmonic content percentage (HD %)
1 Press to light up HD % lamp.
2 Press , , or to
change the harmonic order.
After pressing or :
01 (1st order: fundamental wave compo-
nent) 02 (2nd order) … 49 (49th
order) 50 (50th order) 00 (0th order:
DC component) 01
After pressing :
01
→ 00 → 50 → 49 → ⋅⋅⋅ → 02 → 01
The harmonic content percentage will be
displayed in areas b through d on the dis-
play.
(Default display)
Display area
b: Harmonic voltage content
percentage
Display area
c: Harmonic current content
percentage
Display area d: Harmonic active power content
percentage
Press through to change the dis-
play parameter.
Parameters that can be downloaded with communications functionality