1-69
OPERATOR'S STATION
5. Push selector knob (2) to display Unit Selection screen
(7).
6. Rotate selector knob (2) to highlight the Desired Unit
System. Push selector knob (2) to set the unit (Metric or
US system).
7. Before changing °C and °F, turn the blower of the air
conditioner ON.
Rotate selector knob (2) to highlight desired unit system
(°C or °F). Push selector knob (2) to set the unit.
When pressing selector knob (2), "Wait." will be displayed
and then the change will be completed.
7
2
MDCD-01-026
MDAA-01-183EN
MDAA-01-184EN
MDAA-01-182EN
To Next Page
Loading...
