7-128
MAINTENANCE
Clean Cab Floor
--- as required
IMPORTANT: When cleaning the cab floor with tap
water, spray the floor only. Take care not to splash
the surrounding area. Do not increase water spray
speed by restricting the hose end, and do not use high
pressure steam for cleaning. Be sure to completely
remove any moisture from the surrounding area.
1. Park the machine on solid and level surface. Lower the
bucket to the ground. Before cleaning, stop the engine.
2. Sweep the cab floor clean using a brush, and brush dust
from the cab floor while spraying water.
3. When cleaning the floor mat, sweep dust (water) along
the grooves on the floor mat.
4. When cleaning after removing the floor mat, sweep dust
(water) through one cleaning hole.
MDAA-07-041
To Next Page
Loading...
Need help?
General
