Hitachi ZAXIS 120-6 class - Bucket Types and Applications; Specifications

12-8
SPECIFICATIONS
Bucket Types and Applications
ZX160LC-6
Bucket
Bucket Capacity
m
3
Bucket Width
mm
(With side
cutter)
Application
PCSA
(Heaped)
CECE
(Heaped)
2.58 m
Arm
3.08 m
Arm
Hoe Bucket
0.52 0.45 910
 
0.60 0.55 1045

*
0.70 0.60 1125
 
0.82 0.7 1260

-
Reinforced Hoe Bucket
0.60 0.55 1045
 *
0.70 0.6 1120
 *
One Point Ripper
- - - -
Slope-Finishing Blade
- 1700 (67”)
Bank cutting
finish
 
V-type Bucket
 
Clamshell Bucket
(Shell-push)
0.4
Bucket width
590
Side ditching

-
f
NOTE:
Symbols in the above table have the following meanings.
: General excavating
: Light duty excavating
: Rock digging
: Loading work
: Slope-finishing work
- : Not applicable (not warrantable)
Hoe bucket is applicable to the following types of work.
 General excavating:
 For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
 Light duty excavating:
 For digging and loading operation of dry, loosened earth, sand, mud and so on.
 Their bulk density shall be less than 1.60 t/m
3
as a standard.
 Loading:
 For loading operation of dry, loosened earth and sand.
 Their bulk density shall be less than 1.10 t/m
3
as a standard.
 Rock digging:
 For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
* Applicable only to 700 mm grouser shoe.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.
45 °