12-24
SPECIFICATIONS
Bucket Types and Applications
ZX350LC-6
Bucket
Bucket Capacity
m
3
Bucket Width mm Front-End Attachment
PCSA
(Heaped)
CECE
(Heaped)
With side
cutter
Without side
cutter
3.2 m
Arm
4.0 m
Arm
Hoe Bucket
(Super V)
1.15
1.40
1.62
1.86
1.40
1.00
1.20
1.40
1.60
1.20
1230
1410
1590
-
1410
1100
1280
1460
1640
1280
-
-
-
Reinforced Bucket
1.40
1.62
1.20
1.40
1410
1590
1280
1460
-
Rock Bucket
(Super V)
(Transverse-Type-Pin)
(Super V)
(Transverse-Type-Pin)
1.15
1.38
1.38
1.50
1.50
1.00
1.20
1.20
1.30
1.30
1200
1360
1360
1470
1470
1130
1310
1270
1420
1380
-
-
-
-
-
Ripper Bucket 0.90 0.80 - 1010
-
One Point Ripper - - -
-
Clamshell Bucket 1.00 - -
f
NOTE:
Symbols in the above table have the following meanings.
: General excavating
: Light duty excavating
: Rock digging
: Loading work
: Slope-finishing work
- : Not applicable (not warrantable)
Hoe bucket is applicable to the following types of work.
General excavating:
For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
Light duty excavating:
For digging and loading operation of dry, loosened earth, sand, mud and so on.
Their bulk density shall be less than 1.60 t/m
3
as a standard.
Loading:
For loading operation of dry, loosened earth and sand.
Their bulk density shall be less than 1.10 t/m
3
as a standard.
Rock digging:
For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.
To Next Page
Loading...
Need help?
General
