13-25
HYDRAULIC BREAKER, HYDRAULIC CRUSHER AND QUICK COUPLER
OPTIONAL ATTACHMENTS AND DEVICES
MZX5-13-011
MZX5-13-012
When the arm is rolled in with the crusher equipped, the
crusher may come into contact with the boom.
When operating the crusher with the boom fully raised,
be careful of falling objects.
When operating the crusher on the floor in a building,
first confirm that the floor has sufficient strength to
support the load caused by crushing, in addition to the
machine weight.
Depending on the operation method, a load higher than
the machine weight may be applied to the floor.
Watch Out!
Take care not to hit
the boom with the
crusher
MZX5-13-010
To Next Page
Loading...
Need help?
General
