Voyager 1602g User Guide 147
EAN/JAN-8 Check Digit
This selection allows you to specify whether or not the check digit should be trans-
mitted at the end of the scanned data. Default = On.
EAN/JAN-8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN-8 Addenda Required
When Required is scanned, the scanner will only read EAN/JAN-8 barcodes that
have addenda. Default = Not Required.
To Next Page
Loading...
