Honeywell Voyager 1602g - Page 208

Voyager 1602g User Guide 191
Serial Trigger Mode Read Time-Out
(0 - 300,000 ms) *30,000
TRGSTO#### 75
Poor Quality Codes Poor Quality 1D Reading On DECLDI1 76
*Poor Quality 1D Reading Off DECLDI0 76
Poor Quality PDF Reading On PDFXPR1 76
*Poor Quality PDF Reading Off PDFXPR0 76
CodeGate *CodeGate Off Out-of-Stand AOSCGD0. 77
CodeGate On Out-of-Stand AOSCGD1. 77
Mobile Phone Read Mode Hand Held Scanning - Mobile
Phone
PAPHHC 77
Character Activation Mode *Off HSTCEN0 77
On HSTCEN1 77
Activation Character (Range 0-
255) *12 [DC2]
HSTACH### 78
*Do Not End Character Activation
After Good Read
HSTCGD0 78
End Character Activation After
Good Read
HSTCGD1 78
Character Activation Timeout
(Range 1 - 300,000) *30,000 ms
HSTCDT###### 79
Character Deactivation Mode *Off HSTDEN0 79
On HSTDEN1 79
Deactivation Character (Range 0-
255) *14 [DC4]
HSTDCH### 79
Illumination Lights *Lights On SCNLED1 80
Lights Off SCNLED0 80
Aimer Delay 200 milliseconds SCNDLY200 80
400 milliseconds SCNDLY400 80
*Off (no delay) SCNDLY0 80
User-Specified Aimer Delay Range 0 - 4,000 ms SCNDLY#### 80
Aimer Mode Off SCNAIM0. 81
*Interlaced SCNAIM2. 81
Centering Window Centering On DECWIN1 82
*Centering Off DECWIN0 82
Left of Centering Window (*40%) DECLFT### 83
Right of Centering Window
(*60%)
DECRGT### 83
Top of Centering Window (*40%) DECTOP### 82
Bottom of Centering Window
(*60%)
DECBOT### 82
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page