Honeywell Voyager 1602g - Page 213

196 Voyager 1602g User Guide
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 132
*Off X25ENA0 132
On X25ENA1 132
Matrix 2 of 5 Message Length Minimum (1 - 80) *4 X25MIN## 132
Maximum (1 - 80) *80 X25MAX## 132
Code 11 Default All Code 11
Settings
C11DFT 133
*Off C11ENA0 133
On C11ENA1 133
Code 11 Check Digits Required 1 Check Digit C11CK20 133
*2 Check Digits C11CK21 133
Code 11 Message Length Minimum (1 - 80) *4 C11MIN## 133
Maximum (1 - 80) *80 C11MAX## 133
Code 128 Default All Code 128
Settings
128DFT 134
Off 128ENA0 134
*On 128ENA1 134
ISBT Concatenation *Off ISBENA0 134
On ISBENA1 134
Code 128 Message Length Minimum (0 - 80) *0 128MIN## 135
Maximum (0 - 80) *80 128MAX## 135
Code 128 Append *On 128APP1 135
Off 128APP0 135
Code 128 Code Page Code 128 Code Page (*2) 128DCP## 135
GS1-128 Default All GS1-128 Settings GS1DFT 136
*On GS1ENA1 136
Off GS1ENA0 136
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 136
Maximum (0 - 80) *80 GS1MAX## 136
Telepen Default All Telepen
Settings
TELDFT 137
*Off TELENA0 137
On TELENA1 137
Telepen Output *AIM Telepen Output TELOLD0 137
Original Telepen Output TELOLD1 137
Telepen Message Length Minimum (1 - 60) *1 TELMIN## 137
Maximum (1 - 60) *60 TELMAX## 137
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page