EasyManuals Logo

HP HPE FlexNetwork 7500 series User Manual

HP HPE FlexNetwork 7500 series
592 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #232 background imageLoading...
Page #232 background image
220
Step
Command
Remarks
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Create an EBGP peer group.
group
group-name
external
By default, no EBGP peer groups
exist.
4. Specify the AS number of the
group.
peer
group-name
as-number
as-number
By default, no AS number is
specified.
If a peer group contains peers,
you cannot remove or change its
AS number.
5. Add a peer into the EBGP
peer group.
peer
ipv4-address [ mask-length ]
group
group-name [
as-number
as-number ]
By default, no peers exist in the
peer group.
The
as-number
as-number
option, if used, must specify the
same AS number as the
peer
group-name
as-number
as-number command.
6. (Optional.) Configure a
description for the peer
group.
peer
group-name
description
text
By default, no description is
configured for the peer group.
7. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
address-family ipv4
[
unicast
]
By default, no BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family exists.
8. Enable the router to
exchange IPv4 unicast
routing information with
peers in the specified peer
group.
peer
group-name
enable
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
To configure an EBGP peer group by using Method 1 (IPv6 unicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Create an EBGP peer group.
group
group-name
external
By default, no EBGP peer groups
exist.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP HPE FlexNetwork 7500 series and is the answer not in the manual?

HP HPE FlexNetwork 7500 series Specifications

General IconGeneral
BrandHP
ModelHPE FlexNetwork 7500 series
CategorySwitch
LanguageEnglish

Related product manuals