HP HPE FlexNetwork 7500 series User Manual

221
Step
Command
Remarks
4. Specify the AS number of the
group.
peer
group-name
as-number
as-number
By default, no AS number is
specified.
If a peer group contains peers,
you cannot remove or change its
AS number.
5. Add a peer into the EBGP
peer group.
peer
ipv6-address [ prefix-length ]
group
group-name [
as-number
as-number ]
By default, no peers exist in the
peer group.
The
as-number
as-number
option, if used, must specify the
same AS number as the
peer
group-name
as-number
as-number command.
6. (Optional.) Configure a
description for the peer
group.
peer
group-name
description
text
By default, no description is
configured for the peer group.
7. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
address-family ipv6
[
unicast
]
By default, no BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family exists.
8. Enable the router to
exchange IPv6 unicast
routing information with
peers in the specified peer
group.
peer
group-name
enable
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
To configure an EBGP peer group by using Method 1 (IPv4 multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view.
bgp
as-number [
instance
instance-name ]
N/A
3. Create an EBGP peer group.
group
group-name
external
By default, no EBGP peer groups
exist.
4. Specify the AS number of the
group.
peer
group-name
as-number
as-number
By default, no AS number is
specified.
If a peer group contains peers,
you cannot remove or change its
AS number.
5. Add an IPv4 BGP peer into
the EBGP peer group.
peer
ipv4-address [ mask-length ]
group
group-name [
as-number
as-number ]
By default, no peers exist in the
peer group.
The
as-number
as-number
option, if used, must specify the
same AS number as the
peer
group-name
as-number
as-number command.
6. (Optional.) Configure a
description for the peer
group.
peer
group-name
description
text
By default, no description is
configured for the peer group.
7. Create the BGP IPv4
multicast address family and
enter its view.
address-family ipv4 multicast
By default, no BGP IPv4 multicast
address family exists.

HP HPE FlexNetwork 7500 series Specifications

General

Brand	HP
Model	HPE FlexNetwork 7500 series
Category	Switch
Language	English