HP HPE FlexNetwork 7500 series

233
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
• Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
N/A
3. Configure automatic route
summarization.
summary automatic
By default, automatic route
summarization is not configured.
Configuring manual route summarization
By configuring manual route summarization, you can do the following:
•
Summarize both redistributed routes and routes injected using the network command.
•
Determine the mask length for a summary route.
To configure BGP manual route summarization (IPv4 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A