HP HPE FlexNetwork 7500 series

234
Step
Command
Remarks
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
• Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
N/A
3. Create a summary route in
the BGP routing table.
aggregate
ipv4-address
{ mask-length | mask } [
as-set
|
attribute-policy
route-policy-name |
detail-suppressed
|
origin-policy
route-policy-name |
suppress-policy
route-policy-name ] *
By default, no summary routes are
configured.
To configure BGP manual route summarization (IPv6 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A