HP ProCurve 5400zl

severity
■ [no] logging severity < major | error | warning | ... >
Usage: [no] logging severity <severity>
Description: Event messages of the specied severity or higher will be
sent to the syslog server. 'no' sends all severities.
Supported Values:
■ major
■ error
■ warning
■ info
■ debug
system-module
■ [no] logging system-module < all-pass | vlan | ip | ... >
Usage: [no] logging system-module <module>
Description: Event messages of the specied system module (subsystem)
will be sent to the syslog server. 'no' sends messages
from all system modules, as does 'logging system-module
all-pass'. Messages are severity ltered before
system module ltering occurs.
Supported Values:
■ all-pass
■ vlan
■ ip
■ igmp
■ ipx
■ stp
■ system
■ chassis
■ console
■ ports
■ dhcp
■ download
■ tcp
■ telnet
■ timep
■ tftp
■ Xmodem
■ update
■ mgr
■ system
■ snmp
■ addrMgr
■ pagp
■ fault
■ ldbal
■ garp
■ gvrp
■ cos
366© 2009 Hewlett-Packard Development Company, L.P.
loggingCommand Line Interface Reference Guide