HP ProCurve 5400zl

■ flash -- Copy data to the switch system image file. (p. 116)
■ image-name -- Specify filename for the USB transfer. (ASCII-STR) (p. 117)
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash. (p. 107)
■ pub-key-file -- Copy the public keys to the switch. (p. 122)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
■ append -- Add the key(s) for operator access. (p. 102)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to
add the key(s). (p. 117)
■ append -- Add the key(s) for access. (p. 102)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 119)
■ append -- Add the key(s) for access. (p. 102)
■ startup-config -- Copy data to the switch configuration file. (p. 123)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
■ copy xmodem -- Use xmodem on the terminal as the data source. (p. 135)
■ command-file -- Copy command script to switch and execute. (p. 106)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
■ config -- Copy data to specified configuration file. (ASCII-STR) (p. 106)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
■ flash -- Copy to primary/secondary flash. (p. 116)
■ cv_flash < primary | secondary > -- Copy to primary/secondary flash. (p. 107)
■ startup-config -- Copy data to the switch configuration file. (p. 123)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
COMMAND DETAILS
running-config (p. 123)cv_out_flash (p. 108)append (p. 102)
show-tech (p. 123)event-log (p. 109)autorun-cert-file (p. 105)
startup-config (p. 123)filename (p. 109)autorun-key-file (p. 105)
tftp (p. 124)flash (p. 116)card (p. 105)
tftp-ip (p. 126)image-name (p. 117)command-file (p. 106)
tftp-ipv6 (p. 129)manager (p. 117)command-output (p. 106)
unix (p. 131)mm (p. 119)config (p. 106)
usb (p. 133)operator (p. 119)crash-data (p. 107)
xmodem (p. 135)pc (p. 120)crash-log (p. 107)
pub-key-file (p. 122)cv_flash (p. 107)
append
■ copy tftp pub-key-file IP-ADDR FILENAME append
Add the key(s) for operator access.
■ copy tftp pub-key-file IP-ADDR FILENAME operator append
Add the key(s) for access.
■ copy tftp pub-key-file IP-ADDR FILENAME manager append
Add the key(s) for access.
102© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide