HP ProCurve 5400zl

| Application |
Protocol | Port Apply rule | DSCP Priority
-------- + ----------- ---------- + ------ ----------
UDP | 23 DSCP | 000111 7
TCP | 80 DSCP | 000101 5
TCP | 914 DSCP | 000010 1
UDP | 1001-2000 DSCP | 000010 1
COMMAND DETAILS
name (p. 426)integer-codepoint (p. 422)2-queues (p. 415)
name-string (p. 426)integer-range (p. 423)4-queues (p. 415)
port-num (p. 427)ip-addr (p. 424)8-queues (p. 415)
priority (p. 428)ip-all (p. 424)apptype (p. 415)
protocol (p. 431)ip-precedence (p. 424)binary-codepoint (p. 416)
queue-config (p. 432)ipv4 (p. 425)binary-range (p. 416)
range (p. 432)ipv4/mask (p. 425)device-priority (p. 417)
type-of-service (p. 433)ipv6 (p. 425)diff-services (p. 418)
well-defined (p. 434)ipv6/mask (p. 425)dscp (p. 418)
well-defined-codepoint (p. 453)max-port-num (p. 425)dscp-map (p. 421)
2-queues
■ qos queue-config 2-queues
Set the number of outbound port queues for all switch ports.
4-queues
■ qos queue-config 4-queues
Set the number of outbound port queues for all switch ports.
8-queues
■ qos queue-config 8-queues
Set the number of outbound port queues for all switch ports.
apptype
■ [no] qos < udp-port | tcp-port >
Usage: [no] qos <udp|tcp> <[ipv4]|ipv6|ip-all> <TCP/UDP-PORT|range TCP/UDP-PORT
MAX-TCP/UDP-PORT>
[dscp <0..63|af11|af12|af13|af21|af22|af23|af31|af32|
af33|af41|af42|af43|ef|cs0..cs7|000000|000001...111111>|
priority <0-7>]
Description: Congure priorities for TCP/UDP services. The priority can
be dened for packets sourced and destined to a particular
TCP/UDP service. The specied priority value will be placed
in the 802.1p priority eld of outgoing tagged packets. The
packets will also be placed in the appropriate outbound priority
queue. '7' means highest priority. If 'dscp' is specied, the
415© 2009 Hewlett-Packard Development Company, L.P.
qosCommand Line Interface Reference Guide